Reflective Film Cutter Plotter GR8000-180

Our push rollers are made from hard materials, it is capable of working accurately for long time. The push rollers can be set to two pressure levels: Strong/ Low.The combination of accurate rigid push rollers, precise material feeding rollers and quality media bracket rollers ensure stable long length tracking of material.

Leading most of the competitors, the GR8000 series if able to do stable long length tracking for 700mm/23ft, which is an important feature for high-level processing, it is ideal for big sign, pattern making.

Tool Carriage is one of the most important parts of the machine. Taking the sport car structure, driven by silent voice coil motor, GR8000 plotter’s tool carriage is featured as fast, more agility and no overheat for long-term non-stop operation.

Dense air inlets & strong air flow to hold down the media flatly and tightly against the table top so that the tool carriage can perform fast, accurate cutting / plotting.

Cutting / Plotting will be stopped when tool carriage is overloading, it is an important safety feature to protect tool carriage when media is jammed.

It is inevitable that the cut table or material surface is not at the same height from point to point, we take Grating Ruler, a precise optical device, to measure the distance between blade tip and material surface in real time, and the cutting depth is adjusted in every 0.01mm by the controller in real time according to the value of distances measured. Subsequently, the blade travels up and down as material surface goes up and down in order to keep the same cutting depth at any position of that tool path across entire working size.In short the cutting depth is consistent; you will not see different shades.

The complete elimination of static interference is especially important for PPF installers. GR8000 series cutter plotter eliminates the static interference successfully having been tested year-round in different weather conditions.

The GR8000 series vinyl cutter is know as high precision cutting, it is able to cut small text strings, such as circles sized Φ0.8mm, characters sized 1x1mm and numbers sized 3x3mm, and it is easy to tear off the scraps.

For more outstanding performance and long-term reliable working, we only use world class brand name components such as BANDO belt, MINEBEA bearing, etc.

The Grating Ruler and correspondent cutting force management deliver clean smooth edge quality, even for the most complex jobs. GR8000 series is able to cut small text strings and it is easy to peal off the waste material, which cut down workload greatly for the users.

Our system makes blade-tip compensation by hardware(main board) instead of software, the cutter works with constant high precision no matter what kind of CAD / CAM software is applied.

One-click to spot the cutting job from those saved in the USB memory by scanning the Bar-code which is printed in media, while not requiring connecting to PC. This function is especially helpful to increase the productivity when there are many files stored in the USB memory.

One-click to add registration marks and generate contour(s) of the object(s).

One-click to read the registration marks and carry out the contour cutting.

To match the cutting path(s) and contour(s) to the best, fine adjustment with either keypad or software is available. If material is placed askew (≤15°), the cutter is still able to work fine, this feature helps to save time.

In our software CADtoPlotPro, user is enabled to put different colors for different cutting paths, and set the processing sequence as color sequence, and different paths are processed by different steps of cutting force.

For medias with multiple layers, different cutting force is applied for different layer.

Advanced algorithm of motion controller, Optimized tool paths, Servo motor on X,Y, Voice coil motor on Z axis and quality precision driving system, all of these elements make the machine moving faster and processing with more efficiency.

Advanced algorithm and quality hardware allow for obvious elimination of distorted, rounded or lifted corners.

On every cutting path, the start point and end point coincide accurately, while no need any OVERCUT.

Half cut / Perforation cut are available, every time you may carry out either one or both.

Dotted lines cutting is applicable for medias with 2 layers typically and also kinds of paper.

One-click to install print driver and printout with USB, send cutting job from any CAD software that with printer feature. Our print driver works with Windows 32/64 bit.

Unnecessary to do any format conversion, GR8000 is compatible with. DXF file directly.

One-click deletion button for the currently print document. 

Transfer working files by USB memory and support repeated operation.

Industry leading technology is applied to calibrate the perpendicular between different axes and the parallelism between gantry and cut table.

Leading the same industry, we make software by our-self, we are able to adapt our system to the latest version of popular CAD / CAM software, such as AutoCAD, Adobe Illustrator, Coreldraw and Flexisign and more.

We supply Software Development Kit / SDK to match with client’s software, which deepen cooperation between Gunner and Professional clients.

It is applied to measure the size of media, the cutting/ plotting operation won’t be carried out if media size is not big enough for the contents, and controller will ask operator to enlarge the media or decrease the size of contents. Media sensor helps greatly in saving media and increasing efficiency.