Digitrim TM1700B

  • Introduction
  • Technical Parameters
  • Details
  • Optional
  • Samples
  • Videos

Paper Trimmer & Guillotine Paper Cutter & Expanded Polyethylene Cutting machine (Rolling poster for outdoor advertising cutting system)

With the universal and application of UV direct printing KT board, PVC board, flying edge and other businesses, the post-press technology has become a pain point for the majority of users.

The VICUT trimmer TM series is automatic digital finishing machinery which is widely used for cutting boards and rolls in advertising industry. It is controlled by system software on the machine, no cutting dies required. The VICUT paper cutter changed the traditional cutting method and reduces employee fatigue, makes your finishing job easier and faster.

The paper cutting machine (Board Trimmer) can work 24 hours continually and it’s able to handle mass production.


1. Fast speed and productivity. A complete large scale cutting job can be done in a few minutes.

2. High precision. Imported guide rail and powerful brush-less servo motors guarantees high cutting precision with fast speed.

3. Cutting blades material use tungsten alloy steel which allows for continually cutting 50k times (KT board).

4. Large cutting stroke allows for cutting wide range materials with different thickness.

5. Environmental friendly design, no pollution, automatic computer program control.

6. Simple operation, no requirement for on-site installation and training, the user is able to learn operation in ten minutes with a carry-on user manual.

7. Users can set up start cutting point and cutting width freely, cutting speed is also adjustable.

8. High safety performance. The machine equipped with muti-protection system, it stops working when you open upper cover or touch the moving carriage.

Max. Paper Feed Width1700mm2500mm1700mm
Cutting Methodhigh-speed spinning wheel blades
Blade Materialtungsten alloy steel/high-speed steel
Positioning Sensor Typeoptical positioning
Starting Modehand switch button/ foot pedal
Safety Modeopen cover protection
Tool Lifemore than 50K times(KT paper as example)more than 100K times(PP paper as example)
Cutting Precision≤0.5mm
Cutting Speed1-1200mm/s
Drive Modehigh power brush-less motor
Media Fixing Methodcylinder down pressure fixed
Positioning Methodred laser positioning
Media Cutting Thickness0.5mm~8mm(depending on the selected medium)
Max. Material Thickness8mm
Control PanelLED panel (Chinese/English)
Power Voltage100-120V (AC)/3.0A. 200-220V(AC)/2.0A, 50/60Hz Optional
Cutting MaterialKT board, PVC board, rubber pad, etcPP Paper, sticker,printing media, etc.
Packing Size250x66x55cm(0.91CBM)330X66X55cm(1.2CBM)250x66x55cm(0.91CBM)
G.W./N.W.115/85Kg ± 15Kg180/121Kg ± 15Kg115/85Kg ± 15Kg



Detail Instruction


 Rolling Paper Trimmer TM1700B

Barometer, which regulates the pressure, gives the beam a downward pressure, and holds down the material.



Moving cartridge, strong for cutting the materials with one cut.



High-speed spinning wheel blades, made from tungsten alloy steel, can cut more than 50,000 times (depending to the media).



Blade holder. Special inside structure, fix the blades tightly and enables cutting smoothly.



User friendly LED control panel, easy operation.



Red light optical sensor. It reads crop marks on the printing boards so that the cutting blades will cut through according to the cutting lines.

Digitrim for cutting KT board 2

Digital finishing system for cutting KTboard 3