How Can The CNC Router Be Used To Improve Work Efficiency?

Nov 13 , 2018

Increasing the work efficiency of the CNC router is equivalent to improving the production efficiency, which is very necessary for the development and growth of the enterprise.

1. Determine the number of different knives according to different materials.

Since the cutters of different materials will have a maximum amount of knives, when we use the CNC Router, we should try not to use the maximum knives of the knives for processing. For long time processing, the cutters are damaged faster. Moreover, the speed is not improved when the maximum amount of knife is processed, and the speed is likely to cause the knife to be broken.

Therefore, it is better to set the amount of the lower knife to 2/3 of the maximum amount, so that the tool life will be greatly increased, and the machining speed can be increased a lot; thus, the tool cost can be saved and the machining efficiency can be improved.

2. Determine the depth of the knife according to the thickness of the engraving material.

We have to carry out roughing according to the actual situation and then carry out finishing. When roughing, the entire allowance is cut off as much as possible to save the finishing time; tool materials with better processing properties can also be used.

The performance of the high precision ATC CNC router is not only reflected in the hardware configuration of the machine but also requires us to accumulate processing experience for a long time to improve the processing efficiency of the engraving machine. is not only reflected in the hardware configuration of the machine but also requires us to accumulate processing experience for a long time to improve the processing efficiency of the engraving machine.

In short, the most important point is to determine a reasonable amount of cutting according to the hardness of the engraving material and the performance of the engraving tool, so that the advantages of the engraving machine can be achieved and the expected engraving effect can be achieved.

CNC Router

products

Skype